CAPITAL SPORTS Stringmaster Manual De Instrucciones página 23

Mount the foot (#3) on the main part (#21). Screw together with the
M8x50mm bolt (#2), the bow washer (#47) and the M8 cap nut (#76).
Insert the M8x50mm screw (#2) through the hole in the base (#3) so that
the square head remains properly anchored in it. Then secure the other side
with the cap nut (#76).
Connect the two ends of the monitor cable (#45) together and then mount
the monitor (#44) on the monitor clamp on the frame. To do this, remove
the screws (#75), add the left and right cover parts (#22 + #31) and fix
again (#75).
Put safety caps (#77) on the ends of the screws.
Mount the saddle (#71) on the bracket (#67) and screw with the M6x15mm
bolt (#65) and a washer (#66) - fix with the adjustment pin (#58).
Place caps (#77) on the protruding screws. Now adjust the seat with the
adjustment pin.
1
2
EN
23