Becken S 5050 IX A Manual De Instrucciones página 7

The airflow should be exit directly through permanent openings made in walls
separating the compartment with the outside or the air supply ducts.
The airflow can also be obtained indirectly from the installation local, provided
that such sites have direct vent, do not present fire dangers and are not
sleeping rooms.
The flow of air between the adjacent site and the installation local must be
carried out freely through permanent openings (which can be obtained by
increasing the space between the door and the floor, for example).
The air intake openings must have a minimum section of 100cm
be blocked accidentally.
For devices without safety valves on the desktop, the air intake openings must
have a minimum section of 200 cm
Before installing the device you must remove the adhesive plastic film that
protects the metal parts.
If the appliance is placed on a base, you must ensure that the base does not slide.
The appliance must be firm and levelled (with the help of the supplied foot).
The accessible parts of the cooker can be hot, especially when the oven is
operating.
Do not let children get close to the appliance.
The cooker should always be installed by qualified and authorised personnel.
This appliance is of type X: category for overheating.
Before switching on the appliance check that it is correctly regulated for the
type of gas available.
When burners are on check if the flames are always regular.
Before removing the saucepans from the cooker turn off the burners.
The use of a gas appliance requires regular air ventilation. Make sure that the
installation complies with the respective instructions.
2
.
7
2
and must not