Becken S 5050 IX A Manual De Instrucciones página 11

a) Choose the inlet gas connection according to the type of gas available in your
home.
b) Cooking top burners:
Remove the pan supports from the hob, the burner covers, the
burner spreaders and the burner skirts.
Unscrew and remove the injectors and replace them with those
corresponding to the available gas (see table 1).
Replace all burner components and the pan supports.
c) Oven
Open the oven door and remove all internal accessories and the oven bottom.
Remove the burner by losing the screw placed in the front and turning it up.
Unscrew and remove the injector and replace it with those corresponding to
the available gas see (table 1).
Screw the burner and put in place the oven bottom and the internal
accessories.
d) Minimum flow adjustment – oven burner only
Put the burner for a few minutes at maximum.
With the screwdriver loose the screw fixing the burner.
Move the burner forward or backward until the flame is present with a bluish
color, stable, without noise and without yellow tips.
Tighten the screw to fix the burner.
e) Low flow adjustment
Light the burner on and put the knob in the Low Position.
11