Cookers With Bottle Compartment; Conversion To Other Type Of Gas - Becken S 5050 IX A Manual De Instrucciones

The maximum length of the flexible rubber tube must be of 1500mm.
The connection to the cooker must be done on the same side of the point of feeding,
in a way that the tube doesn't cross the back of appliance. If necessary, change the
gas inlet or request to the technical assistance the adaptation tube so that the
entrance of gas in the appliance is done on the correct side.
After connecting the unit, check for eventual leaks with a frothy product. Never use a
flame.

2.2.1 Cookers with Bottle Compartment

The maximum high of the bottle with reducer must be of 610mm and the maximum
width of 310mm.
In these cookers the flexible rubber tube must have a minimum of 400mm and a
maximum of 1150mm and must never touch the left side of the bottle compartment.

2.2. Conversion to other type of Gas

This appliance has been designed to function with Butane Propane or Natural gas.
This appliance is provided with a label on the rear panel, near the gas inlet, indicating
the type of gas and pressure for which the cooker has been adjusted.
The indication of the gas and pressure that the cooker has been adjusted to, can also
be found on the data label or on the package of the appliance.
In order to convert from one type of gas to another, proceed as follows:
1. Back Shield
2. Commutator
3. Extension of the Commutator
10