Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4. Loosen the lock nut (5) at the lower end of
the cable. Turn the adjusting nut (6) to
obtain the specified free play. Tighten the
lock nut (5) and check the adjustment.
5. Start the engine, pull in the clutch lever
and shift into 1st gear. Make sure the
engine does not stall and the motorcycle
does not creep. Gradually release the
clutch lever and open the throttle. The
motorcycle should begin to move
smoothly and accelerate gradually.
If proper adjustment cannot be obtained or
the clutch does not work correctly, see your
Honda dealer.
Other Checks:
Check the clutch cable for kinks or signs of
wear that could cause sticking or failure.
Lubricate the clutch cable with a commercially
available cable lubricant to prevent premature
wear and corrosion.
(5)
(5) Lock nut
(6) Adjusting nut
(A)
(6)
(B)
(A) Increase free play
(B) Decrease free play
17
Tabla de contenido
