Temperature Table; Dry Ironing - Fagor PL-415 S Manual De Instrucciones

interior 14/4/02 11:57
• In the event of technical failure or
improper working, switch the machine
off and do not try to repair it. Repairs
should only be carried out by a Technical
Assistance Service authorised by the
manufacturer. Always demand the use of
original spare parts. Any failure to follow
the above instructions could affect the
safe functioning of the appliance.
• If you decide never to use the appliance
again, cut the lead, first ensuring that the
appliance is unplugged.
• The user should never attempt to change
the cable. If, for any reason, the cable
requires changing, contact a Technical
Assistance Service authorised by the
manufacturer.
• Never hold the appliance under the tap
to fill the water deposit.
• Do not let the mains cable touch the hot
parts of the iron.
• During use, the appliance becomes
extremely hot and can cause serious
burns. Always pick up the iron by the
handle and avoid contact with the
metallic parts and steam.
• Do not turn the iron towards people when
it is expelling steam. This is extremely
dangerous.
• Do not use the iron on very wet fabrics.
• Do not store the iron in a horizontal
position (base down) whilst still hot. Wait
until it has cooled.
• Do not mix stain-removers or similar
products on fabrics to be ironed.
• Unplug the iron when not in use. Never
leave plugged in when not absolutely
necessary.
• The appliance contains a safety device
which, when activated, interrupts the
working of the iron. To reactivate your
iron, contact an authorised Technical
Assistance Service.
All manuals and user guides at all-guides.com
Pgina 15
4. BEFORE USING YOUR IRON FOR
Before using your iron for the first time, we
recommend that you clean the steam
outlets located on the iron base (10), as
indicated in the section "SELF-
CLEANING", in order to prevent staining
caused by possible deposits left over from
the manufacturing process.
When selecting the temperature, follow
the instructions printed on the label of the
garment to be ironed. If the garment does
not have a label, use the table below:

TEMPERATURE TABLE

Synthetic fibres
Silk
Wool
Cotton
Linen
If you have any doubts about the
composition of the fabric, always begin
ironing at a low temperature on a
concealed part of the garment and slowly
increase the temperature setting, taking
care not to spoil the fabric, until all the
creases have disappeared.

Dry ironing

1. Place the iron on a stable and heat-resistant
surface.
2. Turn the temperature selector (7) to MIN
(Fig. B).
3. Turn the function selector (3)
4. Place the iron in an upright position, resting
it on the support base (11).
5. Plug it in and turn the temperature selector
to the desired position. The ON/OFF pilot
light (6) will come on.
6. When the ON/OFF pilot light switches off,
the iron has reached the selected
temperature.
16
THE FIRST TIME
Fabric Temperature
•
•
••
•••
•••
5. INSTRUCTIONS FOR USE
, (Fig. C).