Drain Connection - Alliance Laundry Systems HC18MD2 Instrucciones De Instalación

Installation

Drain Connection

Figure 28 and Figure 29 show typical drain trough and
drain line installations.
Connect the drain outlet to a vented drain system using
only a flexible connection. The drain system must be
vented to prevent an air lock or siphoning.
DRAIN TROUGH
1 Drain Hose
2 Drain Valve
3 Overflow Hose
DRAIN LINE
1 Drain Hose
2 Drain Valve
3 Drain Tee
* 1 foot (0.3 m) minimum between water inlet valve and vent pipe.
40
2
1
2
1
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Use the supplied black rubber adapter and clamps to
transition from the machine drain outlet to the two
inch schedule 40 PVC plumbing (20, 25 and 30
models) and the three inch schedule PVC plumbing
(40, 60 and 80 models).
If proper drain size is not available or practical, a surge
tank is required. A surge tank along with a sump pump
should be used when gravity drainage is not possible,
such as in below-ground-level installations.
3
4
5
4 Drain Tee
5 Floor
6 Open Drain Trough
Figure 28
6*
4
1 ft.
(0.3 m)
3
4 Overflow Hose
5 Vent Pipe
6 Water Inlet Valve*
Figure 29
6
H050I
5*
CHM2010N
H050I
F232135