Replacement Parts; Customer Service; Remove After Shipment (Opl Models Only) - Alliance Laundry Systems HC18MD2 Instrucciones De Instalación

Introduction

Replacement Parts

If literature or replacement parts are required, contact
the source from which the machine was purchased or
contact Alliance Laundry Systems at (920) 748-3950
for the name and address of the nearest authorized
parts distributor.

Customer Service

For technical assistance, call (920) 748-3121, Ripon,
Wisconsin U.S.A.
8 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Remove After Shipment (OPL
Models Only)
A yellow retainer has been inserted in the door locks
of all cabinet hardmount on-premise laundry washer-
extractors to prevent the door from locking during
shipment. Remove the yellow retainer during
installation by pulling it off.
NOTE: Once retainer is removed, machine must be
powered to unlock door.
A tag has been attached to the washer-extractor's door
handle as a reminder that the retainer must be removed
before operation. Refer to Figure 3.
Remove Yellow Retainer
Before Starting Machine.
Note: A Retainer has been
inserted to prevent the door from
locking during shipment.
Figure 3
CFS503N
F232135