Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
Drain Connection
Figure 3 shows plumbing for UM machines.
A flexible connection must be made to a vented drain
system to prevent damage to rigid drain pipes. Drain
should be vented to ensure proper flow and prevent
siphoning. If proper drain size is not available or
practical, a surge tank is required. A surge tank along
1
30 Amp – three-phase Circuit Breaker
2
3/4" Water Outlet
3
3/4" min. Cold Water Supply Line
4
3/4" min. Hot Water Supply Line
Drain Line Sizing
Minimum Drain ID in. (mm)
Number of Machines
1
2
3
4
5
6
7 – 10
Table 2
14
2
3
4
6
7
UM100/UM202
(Rear View)
100/202
2 (51)
3 (76)
4 (102)
4 (102)
4 (102)
4 (102)
6 (152)
with a sump pump should be used when gravity
drainage is not possible, such as in below-ground-level
installations.
Refer to General Specifications and Table 2 for drain
information.
1
5
5
40" Required for 100, 60" Required for 202
6
2" min. Waste Line Tee
7
4" min. Waste Line
Figure 3
Y043I
F232113
Capítulos
Tabla de contenido
