Instrument Panel; Transport Mode - SAME DEUTZ-FAHR iMonitor 2.0 Manual Del Conductor

Area
Parameters displayed:
1. Area worked (ha)
2. Distance travelled (km)
3. Average area worked per hour (ha/hour)
4. Average speed
5. Total working time

Instrument panel

Parameters displayed:
1. Time worked (percentage completed shown in green) out of total time for
selected fi eld
2. Area worked (percentage completed shown in green) out of total area of
selected fi eld
3. Instantaneous speed (km/h)
4. Instantaneous fuel consumption (litres/h)
5. Distance travelled out of total distance for selected fi eld
The gauges in this screen allow easy comparison between the instantaneous val-
ues (shown in the fi eld alongside) and the historical average values for this type
of task, indicated in green.
Parameters displayed:
1. Instantaneous fuel consumption per hectare
2. Hectares covered per hour, instantaneous value (ha/h)

Transport mode

Transport mode is activated automatically when the fi eld dimension value and/or
implement dimension value is set to 0. (see the "Field settings" and "Implement
settings" headings).
When transport mode is activated, the working time and area worked values are
not available.
1-16
OPERATOR'S MANUAL
Fig. 37
Fig. 38
Fig. 39
Fig. 40