SAME DEUTZ-FAHR iMonitor 2.0 Manual Del Conductor página 30

1.4.2 - Adjustment with MMI
To set the parameter value proceed as follows:
1. Use the MMI rotary control to select the parameter to program. A yellow square appears on the parameter bar.
2. Press the rotary control to confi rm. A red square appears on the parameter bar.
3. Turn the rotary control to set the required value, clockwise to increase and counterclockwise to decrease. The changing value
is shown on the bar.
4. Press the rotary control again to confi rm the value.
To cancel the operation press the ESC button on the MMI.
1-6
OPERATOR'S MANUAL