SAME DEUTZ-FAHR iMonitor 2.0 Manual Del Conductor página 34

1.5.4 - SDS sequences
The SEQUENCES function allows the user to program sequences of operations for subsequent recall using the armrest lever during
normal tractor operation.
Access the function by pressing the "Sequences" control located in the right-hand part of the display.
The screen displays the following items:
1. DELETE: delete a new sequence
2. Retrieve a programmed command sequence
3. EDIT/SAVE enables sequence editing mode
4. Steps grouping
5. Active step being edited
6. Steps changeover
7. Insert a step
8. Delete current step
9. Functions that can be inserted in a sequence
Method of execution of sequences
Two or more steps of an operating sequence can be performed in different
ways:
1. Manual activation with the button on the armrest.
2. Automatic time-based activation. In this mode the sequence passes from
one step to the next when the set time as displayed in fi eld 4 has elapsed.
3. Automatic space-based activation. In this mode the sequence passes from
step to the next when the tractor has travelled the set distance as shown
in fi eld 4.
1.5.5 - ASM
The page displays the following information:
1: ASM status (green icon: ACTIVE)
●
A- The value shows the instantaneous steering angle
❍
2: 4WD status (green icon: ACTIVE)
●
B - The value indicates the steering angle set for 4WD disengage-
❍
ment
C - The value indicates the maximum speed set for 4WD disengage-
❍
ment
3: Differential status (green icon: ACTIVE)
●
D - The value indicates the steering angle set for differential unlock-
❍
ing
E - the value indicates the maximum speed set for differential un-
❍
locking
4: Quick Steer status
●
F - Indicates the Quick Steer level setting
❍
1-10
OPERATOR'S MANUAL
Fig. 21
Fig. 22
Fig. 23