Tabla de contenido
Idiomas disponibles
Idiomas disponibles
10 washer (PC140072) and the M-10 handle
(PC130169).
The arm can be regulated with its top part spindle
to cut up to 200 mm. in two stages with 350 mm.
blades (See Graphic 2.5.).
Graphic 2.5. TEIDE model arm assembly
Carriage assembly:
The carriage (TE000026/OR000010) is placed
by lifting it slightly by its left side and introduc-
ing the anti-overturn in the support guide to
then place the channelled wheels (TE000130)
in the left guide (See Graphic 2.6.).
Fig. 2.6. Carriage assembly
The carriage has an end stop to avoid derail-
ing, as well as an anti-overturn.
Dismantling the rear end stop (TE000016)
allows cutting a larger piece various times.
Head assembly:
The head (TE000125) is placed putting, in the
first place, the 20 washer (PC140071) in its
axel, to then putting the head shaft through
the hole located at the front part of the arm,
to then fix it with another 20 washer and the
M-20 nut (PC140326), (See Graphic 2.3.).
Graphic 2.7. Head assembly
34
Capítulos
Tabla de contenido
