Introduction; Safety Information - durher Ordesa M Manual De Instrucciones

1. Introduction

This Instructions Manual corresponds to the
DURHER brand DOVETAIL CUTTER models: ORDE-
SA M, ORDESA T, ORDESA INOX M, ORDESA INOX T,
TEIDE M, TEIDE T, TEIDE INOX M, TEIDE INOX T.
Before installing and starting up the machine,
THE MANUAL INDICATIONS SHOULD BE CAREFUL-
LY READ.
Graphic 1.1. Dovetail Cutter
The instructions manual includes information
on the machine from its delivery to its use.
Being a manual it should be kept in an appro-
priate and accessible place, to facilitate use.
DURHER reserves the right to modify the
design and/or manufacture of its products
whenever considered necessary, without the
obligation of having to adapt any product pre-
viously supplied.
The design and manufacture of the machine,
as well as of the material used, have been
carried out and chosen in order to provide
the user with a safe, sturdy and reliable
machine. The EC marking and the documen-
tation provided guarantees that the machine
complies with the European Regulations and
Rules on safety, provided that the machine is
used correctly.
The present Manual is also for use by the oper-
ators with respect to safety.
Any type of information included in this instruc-
tions manual is property of DURHER, and
should not be used (except for its start-up),
copied, photocopied, handed over or commu-
nicated to third parties without previous writ-
ten authorisation by DURHER.

1.1. SAFETY INFORMATION

Any maintenance work on the machine should
be carried out under safety conditions.
The instruction manual includes information
on the handling, assembly, adjustment, con-
nections and safe use of the machine.
The non-compliance with this information can
give rise to risks to the operators, environment
or the machine itself, and may result in the
loss of the right to claim damages.
Amongst others, the following risks may rise:
– Risk to the people or objects, of a mechan-
ical, electric or thermal circuit breaker type.
– Risks for failure in maintenance and repair
specific procedures.
– Risks of serious malfunctioning of the
machine.
Any national regulation (electric, health and safe-
ty at work, etc.) should be taken into account in
order to avoid accidents, as well as own regula-
tions, as long as these do not conflict with those
laid down in this instructions manual.
The machine includes advising pictograms. The
location is indicated in the following graphics:
29