Temporary Storage; Location; Assembly - durher Ordesa M Manual De Instrucciones

platform, crane with fixing straps or a forklift
(weight of the packaged machine: see table 1).
Do not knock or abruptly move the package.
Safety measures before unloading
Block the transport vehicle before unload-
ing.
Revise the delivery note, making sure
that what has been received corresponds
to what was actually ordered.
Check the conditions of the packaging
before unloading the machine.
Unpacking
Remove the staples attaching the box with pli-
ers. Carry this operation carefully in order to
avoid cuts with the tool.

2.4. TEMPORARY STORAGE

For the storage of the machine, this should be
placed in a horizontal position, in a humid-free
location, protecting it from the dust and dirt.
Protect the components wrapping them in plastic.

2.5. LOCATION

The dovetail cutter is a machine designed for
cutting ceramic material and masonry.
1m.
Graphic 2.2.
0.8m.
MACHINE
THE CUTTING OF WOOD OR SIMILAR MATER-
IAL IS ABSOLUTELY FORBIDDEN.
Before connecting the cutter to the electric
mains, make sure that the table is supported
on its four legs, on a horizontal surface, with
the wheels folded and with no risk of lack of
balance.
Safety measures to be taken before placing
the machine.
In the first place, the necessary space to
comply with the minimum safety mea-
surements required by the laws in force
in each country should be calculated.
If the machine is placed near a wall, the
minimum required distance will be 1 m.
If the machine is placed near another
machine, the minimum distance will be
0.80 m.
In any case, the length of the piece of piece
to be cut and the space to store the cut
par ts and the par ts to be cut should be
taken into account. Never place the machine
in machiner y or people transit areas, nor in
places with risk of falls or material falling on
the machine.
The use of the machine in places with fire or
explosion hazards is completely forbidden.
At the same time we recommend not setting
up the machine near areas with welding tasks,
flames or sparks.

2.6. ASSEMBLY

The dovetail cutter reaches the user with the
legs, arm, trolley, head, diamond blade, longi-
tudinal guide and rear flap unassembled.
Any handling or modification carried out on the
machine, not expressly authorised in writing,
voids the guarantee and frees DURHER from
any responsibility for any type of damage that
the machine may cause.
32