Synergic Curves Screen; Programs Screen - voestalpine URANOS 4000 GSM Instrucciones De Uso

3.7 Synergic curves screen

1 General
Allows the selection of the required welding method.
1
It allows the selection of:
Synergic welding method
Makes it possible to use a series of pre-settings
(synergic curves) available in the memory of the
system.
The changing and correction of the initial set-
tings proposed by the system is allowed.
Manual welding method
Allows the manual setting and regulation of
each individual welding parameter (MIG/
MAG).
Select however one of suggested synergies (5-6) in
order to take advantage of ignition potentiality,
closing arc features....
2/3
Lets you select:
- type of filler material
- gas type
4
Lets you select:
- wire diameter
5
- Type of filler material
- Gas type
6 Wire diameter
7 Header
(See the "Main screen" section).
NO PROGRAM
Indicates that the selected synergic program is not avail-
able or is not consistent with the other system settings.
2 Synergic curves
MIG/MAG
G3/4 Si1 CO 2
(S) 2
G3/4 Si1 Ar 18%CO 2
(S) 7
CrNi 19 9 Ar 2%CO 2
(S) 12
AlMg5 Ar
(S) 17
AlSi5 Ar
(S) 22
Al99,5 Ar
(S) 27
CuAl8 Ar
(S) 32
CuSi3 Ar
(S) 37
Basic FCW Ar 18%CO 2
Rutil FCW Ar 18%CO 2
Metal FCW Ar 18%CO 2
CrNi 19 9 FCW Ar 18%CO 2
Ø (mm)
1.6
0,8 1.0 1.2
(S) 3 (S) 4 (S) 5
(S) 8 (S) 9 (S) 10
(S) 13 (S) 14 (S) 15
(S) 18 (S) 19 (S) 20
(S) 23 (S) 24 (S) 25
(S) 28 (S) 29 (S) 30
(S) 35
(S) 33 (S) 34
(S) 38 (S) 39 (S) 40
/ / (S) 42 (S) 44
/ / (S) 46 (S) 48
/ / (S) 50 (S) 52
/ / (S) 54 (S) 56
Pulsed MIG
G3/4 Si1 CO 2
G3/4 Si1 Ar 18%CO 2
(P) 7
CrNi 19 9 Ar 2%CO 2
(P) 12
AlMg5 Ar
(P) 17
AlSi5 Ar
(P) 22
Al99,5 Ar
(P) 27
CuAl8 Ar
(P) 32
CuSi3 Ar
(P) 37
Basic FCW Ar 18%CO 2
Rutil FCW Ar 18%CO 2
Metal FCW Ar 18%CO 2
CrNi 19 9 FCW Ar 18%CO 2

3.8 Programs screen

1 General
Allows the storage and management of 64 welding pro-
grams which can be personalised by the operator.
1/2/3/4 Functions
5 Number of the selected program
6 Main parameters of the selected program
7 Description of the selected program
8 Heading
(consult the "Main screen" section).
2 Program storage
Enter the "program storage" menu by pressing button
for at least 1 second.
Ø (mm)
0,8 1.0 1.2 1.6
- - -
(P) 8 (P) 9 (P) 10
(P) 14 (P) 15
(P) 13
(P) 18 (P) 19 (P) 20
(P) 23 (P) 24 (P) 25
(P) 28 (P) 29 (P) 30
(P) 33 (P) 34 (P) 35
(P) 38 (P) 39 (P) 40
/ / (P) 42 (P) 44
(P) 46 (P) 48
/ /
/ / (P) 50 (P) 52
/ / (P) 54 (P) 56
-
49