Metz mecablitz 64 AF-1 digital Manual De Instrucciones página 186

Example:
You use a zoom lens with a focal length range
of 35 mm to 105 mm. In this case, you set
the position of the reflector of the flash unit
to 35 mm.
Resetting to auto-zoom
• Touch the shutter release to begin a data
• Press the
PARAMETER
• Press the
PARAMETER O
P/EV
• Press the
ZOOM
F
• Press the
k
p
q
O
ZOOM
• Press the
A.ZOOM
24
• Press the
p
q
186
transfer between the flash unit and the
camera.
D
button as often as it takes
for the selection menu to appear.
PARAMETER
sensor button on the
touch display.
sensor buttons on the
ZOOM
touch display and select
ZOOM
sensor button on the
touch display.
sensor buttons on the touch
A.ZOOM
display and select .
A.ZOOM
sensor button on the
touch display.
After around 10 seconds, the operation
D
display appears, or press the
repeatedly until the operation display.
.
+
button
Wide-angle diffuser
With the wide angle diffuser
of 12 mm or more can be illuminated (35 mm
format).
Pull the wide-angle diffuser
the reflector as far as it will go, and then
release it.
The wide-angle diffuser automatically
folds downwards. The reflector automatically
moves to the required position.
The distance readings and the zoom value
are corrected to 12 mm on the display panel.
The automatic adjustment of the motor-zoom
reflector is not activated if the wide-angle
diffuser is in use.
To insert the wide-angle diffuser
upwards 90° and push it all the way in.
mecabounce Diffuser MBM-03
If the mecabounce (optional accessories, see
19) is fitted to the reflector of the flash unit,
the reflector is automatically guided to the
position required. The distance data and
zoom factor are corrected to 16 mm.
The automatic adjustment of the motor-zoom
reflector is not activated if the mecabounce
is in use.
The simultaneous use of the wide-angle
diffuser and the mecabounce is not possible.
, focal lengths
out from
, turn it