Manual Flash Mode With Distance Guideline (Gn) - Metz mecablitz 64 AF-1 digital Manual De Instrucciones

The setting for automatic high-speed
synchronisation occurs on the camera
(see camera operating instructions)!
The display of the flash unit then in addition
shows "FP" (
7.5 Manual flash mode with distance
In this flash mode you enter the distance to
the subject in the flash unit. The mecablitz
64AF-1 coordinates the flash output and the
f-stops provided by the camera.
If sufficient exposure is not achieved for the
distance set, the sign
the distance information.
k
180
TTL FP
).
guideline (GN)
appears in front of
Setting the mode of operation
• Switch on the flash unit with the
button.
The start screen appears.
M
Thereafter, the flash unit always switches
on with the mode of operation that was
used last.
2.5 m
• Tap the shutter release to transfer data bet-
M-
5,6
m
35
Zoom F
m ween the flash unit and the camera.
P
1/8
O
MODE
• Press the sensor buttons
touch display and select
M
GN
• Press the sensor button
STROBO
display.
p
q
If the reflector is tilted, operating mode
cannot be selected, as the distance to the
GN
subject is unknown.
1.3m
• Press the sensor button on the touch
M-
5,6
m
35
Zoom F
display for the distance.
m
EV
• Press the sensor buttons
O
GN
touch display and select the distance to the
subject.
3.2m
3.6m
• Press the sensor buttons for the distance
4.0m
selected.
p
q
The setting will take effect immediately.
on the
GN
.
GN
on the touch
GN
on the