Specifications
MD player section
Signal-to-noise ratio
Frequency response
Wow and flutter
Tuner section
FM
Tuning range
Aerial terminal
Intermediate frequency
Usable sensitivity
Selectivity
Signal-to-noise ratio
Harmonic distortion at 1 kHz
Separation
Frequency response
Capture ratio
MW/LW
Tuning range
Aerial terminal
Intermediate frequency
Sensitivity
Power amplifier section
Outputs
Speaker impedance
Maximum power output 40 W × 4 (at 4 ohms)
90 dB
10 – 20,000 Hz
Below measurable limit
87.5 – 108.0 MHz
External aerial connector
10.7 MHz
10 dBf
75 dB at 400 kHz
62 dB (stereo),
65 dB (mono)
0.9 % (stereo),
0.5 % (mono)
35 dB at 1 kHz
30 – 15,000 Hz
2 dB
MW: 531 – 1,602 kHz
LW: 153 – 281 kHz
External aerial connector
10.71 MHz/450 kHz
MW: 30 µV
LW: 50 µV
Speaker outputs
(sure seal connectors)
4 – 8 ohms
General
Outputs
Tone controls
Power requirements
Dimensions
Mounting dimensions
Mass
Supplied accessories
Optional accessories
Optional equipment
U.S. and foreign patents licensed from Dolby
laboratories Licensing Corporation.
Design and specifications are subject to change
without notice.
Line outputs (2)
Power aerial relay control
lead
Power amplifier control
lead
Bass ±10 dB at 100 Hz
Treble ±10 dB at 10 kHz
12 V DC car battery
(negative ground)
Approx. 178 × 50 × 184 mm
(w/h/d)
Approx. 182 × 53 × 162 mm
(w/h/d)
Approx. 1.2 kg
Parts for installation and
connections (1 set)
Front panel case (1)
Rotary Commander
RM-X4S (1)
BUS cable (supplied with
an RCA pin cord)
RC-61 (1 m), RC-62 (2 m)
RCA pin cord
RC-63 (1 m)
Cleaning cloth XP-CD1
Compact disc single
adapter CSA-8
CD changer
CDX-715 (10 discs),
CDX-T65 (6 discs),
CDX-T62 (6 discs)
MD changer
MDX-62
Source selector
XA-C30
EN
25