Locating A Disc By Name; List-Up - Sony MDX-C7900R Manual De Instrucciones

Displaying the disc memo name
Press (DSPL) during CD or CD TEXT disc
playback.
DISC
Each time you press (DSPL) during CD or
CD TEXT disc playback, the item changes
as follows:
Elapsed playback time
Disc memo name
Track name*
Clock
MOTION DISPLAY*
1
If you connect an optional CD unit with the
*
CD TEXT function, the CD TEXT information
will appear in the display when you playback
a CD TEXT disc.
2
* All the items above are scrolled in the
display one by one in order.
Erasing the disc memo
1
Press (SOURCE) repeatedly to select CD.
2
Press (MODE) repeatedly to select the CD
unit.
3
Press (PTY/LIST) for two seconds.
4
Press (DSPL) for two seconds.
5
Rotate the dial to select the name you
want to erase.
6
Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (PTY/LIST) for two seconds.
The unit returns to normal CD playback
mode.
$
$
$
1
$
$
2

Locating a disc by name

— List-up (CD unit with the custom file
function or MD unit)
You can use this function for discs that have
been assigned a custom name. For more
information on disc names, refer to "Labeling a
CD" (page 20).
1
Press (PTY/LIST) momentarily.
The name assigned to the current disc
appears in the display.
DISC
If you add disc memo labels to a CD TEXT
disc, the display setting you make will
determine which information is displayed.
If the disc has only one set of information
(either CD TEXT or disc memo labels), that
information will be displayed regardless of
the display setting you make.
2
Press (PTY/LIST) repeatedly until you
find the desired disc.
3
Press (5) (ENTER) to play back the disc.
Notes
• After a disc name has been displayed for five
seconds, the display goes back to normal
playback mode. To turn off the display, press
(DSPL).
• The track names are not displayed during MD or
CD TEXT disc playback.
• If there are no discs in the magazine, "NO Disc"
appears in the display.
• If a disc has not been assigned a custom file,
"********" appears in the display.
• If the disc information has not been read by the
unit, "?" appears in the display. To load the disc,
first press the number button, then choose the
disc that has not been loaded.
• The information appears only in upper case.
There are also some letters which cannot be
displayed (during MD playback).
ENTER
EN
21