How To Use The Browser-Based Utility; Setup > Basic Setup; Auto/Adsl Mode - Cisco Linksys X2000 Manual Del Usuario

Linksys X2000/X3000
3. In the Password field, enter the password created by the setup software .
If you did not run the setup software, then enter the default, admin .
NOTE
You can also access the browser-based utility through Cisco
Connect .
4 . Click OK to continue .

How to use the browser-based utility

Use the tabs at the top of each screen to navigate within the utility . The tabs are
arranged in two levels, top-level tabs for general functions and lower-level tabs
for the corresponding specific functions .
The top-level tabs are: Setup, Wireless, Security, Access Restrictions, Applications
& Gaming, Administration, and Status . Each of these has its own unique, lower-
level tabs .
NOTE
Within this User Guide, each screen is identified by its top- and
lower-level tab names . For example, "Setup > Basic Setup" is the
screen accessed via the Setup top-level tab, and its Basic Setup
lower-level tab .
If you change any settings on a screen, you must click Save Settings to apply
your changes, or click Cancel Changes to clear your changes . These controls
are located at the bottom of each screen .
NOTE
To learn more about any field, click Help on the right side of the
screen .
Setup > Basic Setup
The first screen that appears is the Basic Setup screen . This allows you to change
the router's general settings .

Auto/ADSL mode

ADSL mode (default) has the following fields that should be completed:
Language
Select your language
To use a different language, select one from the drop-
down menu . The language of the browser-based utility will change five seconds
after you select another language .
Advanced Configuration
12