Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
Model
Voltage
Chuck
Switch
No load speed (drill mode):
- Lo speed
- Hi speed
No load speed (impact mode):
- Lo speed
- Hi speed
Max. Torque
Weight - incl. battery pack
Battery pack
Charger
DESCRIPTION
1.
Keyless chuck
2.
Switch trigger
3.
Direction of rotation selector (Forward/Reverse)
4.
Screwdriver bits
5 . Battery pack
6.
Latches
7.
Depress latches to release battery pack
8.
Torque adjusting Ring
9.
To Decrease torque
10. To Increase torque
11. Impact mode
12. Drill mode
13. Reverse
14. Forward
15. Unlock(release)
16. Lock (tighten)
17. High speed
18. Low speed
19. Battery Charger
20. LED indicator
21. Battery Charger
22. Green Light
23. Red Light
All manuals and user guides at all-guides.com
CHI-1442P
14.4 V
2-13 mm
Variable speed
-1
0-360 min
-1
0-1300 min
-1
0-4680 min
0-16900 min
31 Nm
2.0 kg
BPP-1413 / BPP-1415
BCA-144 / BC-1440 / BC-1415-S
English
-1
OPERATION
CHARGING YOUR BATTERY PACK
The battery pack for your tool has been shipped in a low
charge condition to prevent possible problems. Therefore,
you should charge it prior to use.
Note: Batteries will not reach full charge the first time
they are charged. Allow several cycles for them to
fully charge.
TO CHARGE
Charge battery pack only with the charger provided.
■
Make sure power supply is normal house voltage, 230
■
volts, 50 Hz, AC only.
Connect charger to power supply.
■
Make sure charger plug and input jack are properly
■
connected.
Place battery pack in charger. Align raised rib on
■
battery pack with groove in charger.
Press down on battery pack to be sure contacts
■
on battery pack engage properly with contacts in
charger. When properly connected, red light will turn
on.
Charger: BCA-144/BCA-180
See Figure 7.
The LED indicator, which is located on the charging
■
stand, will light up when charger is properly
connected to power supply. This light indicates your
tool is charging and will remain on until charger is
disconnected from power supply.
After normal usage, 3-5 hours of charge time are
■
required to be fully charged. A minimum charge
time of 5 hours is required to recharge a completely
discharged tool.
9
9
CHI-1802P
18 V
2-13 mm
Variable speed
-1
0-400 min
-1
0-1400 min
-1
0-5200 min
-1
0-18200 min
34 Nm
2.20 kg
BPP-1813 / BPP-1815 / BPP-1817/
BCA-180 / BC-1800 / BC-1815-S
