Switching The Shearing Machine On And Off; Using The Shearing Machine - Heiniger Xpert Traducción Del Manual Original

Fig. 3
CAUTION!
The upper blade of the shearing head is only held by the tapered
X
pins of the chicken feet. If the shear-pressure adjustment head
is released too much, the upper blade can fly off and result in
injuries.
NOTE!
If the clipping pressure is too low, hair can gather between the
X
shearing blades. This results in a poor clipping quality. In this
case, clean the shearing blades as described in chapter 6.7.
6.3

Switching the shearing machine on and off

Fig. 4
6.4

Using the shearing machine

Approach the animal from the front.
X
Secure the animal to be sheared and calm it down.
X
Plug the power plug into the socket.
X
Switch the shearing machine on while you are in the visual range of the
X
animal.
Observe the animal's behaviour while clipping.
X
Switch the shearing machine off after you have finished clipping and pull
X
the plug from the socket.
12
Translation of the original instructions / Sheep shearing machine Xpert
After each new setting, check the
X
cutting power on the animal and only
then continue turning.
If the clipping quality deteriorates,
X
increase the clipping pressure by
turning the adjusting knob another
1/4 turn in the direction of the arrow.
If this does not produce the desired
result, the shearing blades must be
replaced or sharpened.
To switch the shearing machine
X
0
on, slide the ON/OFF switch to the
I
position I.
To switch the shearing machine
X
off, slide the ON/OFF switch to the
position 0 (see Fig. 4).