Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. MAINTENANCE & TROUBLESHOOTING
2.1 Care & Maintenance
●
Please ensure you follow the instructions when assembling.
Keep these instructions for reference.
●
●
Assemble with glue (included) when instructed.
●
Please take care when detaching parts as they are fragile.
●
Ensure parts are fixed firmly in place when assembling.
●
Keep away from exposure to direct sunlight for extended periods and keep away from
direct heat sources.
●
Do not drop on a hard surface or disassemble the unit.
Do not immerse in water.
●
2.2 FAQ
Problem
Pendulum doesn't move
Time shown is not accurate
2.3 Download Build Instructions
There should be build instructions contained within the box.
If for any reason you lose or misplace these instructions, they can be downloaded
again from the following web address:
https://bit.ly/3tq7vTG
If this does not resolve your issue. Please contact ThinkGizmos via email:
and we will endeavor to resolve your problem as quickly as possible.
Cause
1. High Friction between
escapement fork (B20) and
escapement wheel (E11) (see
Step 4 and Step 6).
2. Gears hinder each other.
3. Insufficient driving force
from spring
4. Placed on a tilted surface.
1. Acceleration of gravity
varies from location to
location.
4
Solution
1. Wax parts as shown.
2. Adjust postion of gears and
shaft sleeves.
3. Make sure all parts are
installed correctly and screw
down the spring.
4. Place on a flat level surface.
1. If pendulum swings too fast,
screw down P9.
If pendulum swings too slow,
screw up P9.
Capítulos
Tabla de contenido
Solución de problemas
