Cleaning - Philips Norelco Quadra 7 Manual Del Usuario

8 ENGLISH

Cleaning

Every Week: Razor Heads
◗ The easiest and most hygienic way to clean the
razor heads is to rinse them every week with
hot water. Water from the tap should be on a
hot setting but BE CAREFUL TO TEST WATER
FIRST SO AS NOT TO BURN OR SCALD
HANDS.
◗ Regular cleaning guarantees better shaving
results.
◗ You may also quickly rinse your razor heads
after each use.
1
Always turn razor OFF, remove the
charging plug from outlet and remove cord
from razor before cleaning.
C
2 Press the Razor Head Release Button, flip
open the Razor Head Assembly.
C
3 Clean razor heads and hair chamber by
running under hot water.
4 Close the Razor Head Assembly and shake
off excess water.
C
5 Open Razor Head Assembly again and
leave open to air dry.
6 You may also clean the hair chamber
without water by using the supplied brush.
Once A Month: Razor Heads
◗ Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn razor OFF, remove the charging plug
from the outlet and cord from the razor.
C
2 Press the Razor Head Release Button and
open the Razor Head Assembly.
C
3 Turn the wheel counterclockwise and
remove the retaining frame.
\
4 Remove and clean one set of heads at a
time.
C
5 Separate the cutter from the comb and
rinse clean under hot water.
◗ Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally interchange the cutters and combs,
it could take several weeks before optimal
shaving performance is restored.
C
6 Replace the set back into the Head
Assembly in such a way that the sides with
the little holes point to the middle of the
shaving unit.
◗ Make sure that the two pointy edges of the
head fit exactly into the recesses.
ENGLISH 9