Operating; Warming Up; Engine Inclination - Kawasaki FR541V Manual Del Propietário

20 18

OPERATING

OPERATING

Warming Up

After the engine starts, move the throttle lever (A)
on the equipment to halfway between "FAST" and
"SLOW".
To warm up the engine, run it for 3 to 5 minutes
with the throttle lever in the same load position
(halfway) before putting the equipment under load.
Then, move the throttle lever (A) on the equipment
to its "FAST" position.
NOTICE
Allow engine to warm up sufficiently (3 to 5
minutes at idle) before applying a load. This
will allow oil to reach all engine parts, and
allow piston clearance to reach design spec-
ifications.
NOTICE
While warming up the engine, make sure the
warning lamp (oil pressure) on dash is not
on. The warning lamp must not be illumi-
nated during engine operation (if equipped).
OPERATING

Engine Inclination

This engine will operate continuously at angles up
to 25° in any direction.
Refer to the operating instructions of the equip-
ment this engine powers. Because of equipment
design or application, there may be more stringent
restrictions regarding the angle of operation.
Do not operate this engine continuously at
angles exceeding 25° in any direction. En-
gine damage could result from insufficient
lubrication.
NOTICE