Replacing The Fuses; Brake/Tail Light And The; Turn Signal Light - Benelli BN125 Manual Del Propietário

Periodic maintenance and adjustment

Replacing the fuses

The fuse boxes and individual fuses are lo-
cated under the passenger seat.
To access the main fuse and the fuel
injection system fuse, remove the passen-
EN
ger seat. (See page 3-11).
6
If a fuse is blown, replace it as follows.
1. Turn the key to " " and turn off the
electrical circuit in question.
2. Remove the blown fuse, and then install
a new fuse of the specified amperage.
WARNING
Do not use a fuse of a higher amperage
rating than recommended to avoid cau-
sing extensive damage to the electrical
system and possibly a fire.
INSTALLATION
REMOVAL
Specified fuses:
Injection fuse: 15.00A
Main fuse: 25.00 A
3. Turn the key to " " and turn on the
electrical circuit in question to check if the
device operates.
4. If the fuse immediately blows again,
have a Benelli dealer check the electrical
system.
6 - 28
Brake/tail light and the turn signal
light
This model is equipped with LED-type he-
adlights and LED-type turn signal light.
If a headlight and turn signal light does
not come on, check the fuses and then
have a Benelli dealer check the vehicle.
1
2
1. Brake/tail light

2. Turn signal light

2