Removing And Mounting The Cover; Removing And Mounting The Belt System - Kiddy evocity 1 Manual De Uso

6. Removing and mounting the cover

6.1 Removing and mounting the belt system

Push the plastic clips on the end of the 5 belts from rear through the holes of Back
rest and seat(fig. 24).
Mount the belt system by pushing the clips through the holes and make sure
that they lay flat on the rear of the backrest and the seat.
WARNING
Never use the stroller without the belt system.
WARNING
Make sure that the belts are not twisted and
placed into the correct holes.
6.2 Removing and mounting the cover
Remove the sunroof like like described in section 3.3.
Remove the belt system like described in section 6.1.
To remove the seat cover open 5 snap fasteners at the side of the seat and
backrest(fig. 25; no. 1–5). Open the snap fasteners on the second side also.
Open then the 2 connecting belts under the seat (fig.25, no. 6- 7)
Now pull off the cover from the upper part of the backrest (fig. 26) and from the
foot rest.
To mount the cover follow the steps for removing in reverse order!
WARNING
Don't forget to mount the belt system (see sec-
tion 6.1).
EN
36 36