Adjustment Of The Sun Roof; Removing/Re-Installing The Cover Of The Pram Body - Kiddy evoglide 1 Manual De Uso

WARNING
Before using the pram body seat make sure that
both locking buttons indicate "green". When the
locking buttons indicate "red", pull these up-
wards, so that "green" will be indicated. Test by
pulling upwards whether the pram body is lo-
cked in place and tightly connected to the the
chassis.
WARNING
Do not leave the flexible carrying handles inside
the carry cot.
Put these to outwards (fig. 37, no.1) and fix both
by the snap fastener (fig.37, no.2), so the child
cannot pull it to inside.
To remove the pram body from the chassis press both locking buttons down-
wards (fig. 38; no.1) so that these indicate "red" and pull the pram body upwards
(fig. 38; no.2)

5.4 Adjustment of the sun roof

The sun roof can be adjusted freely into the desired position by turning the front
bar of the sun roof (fig. 39).

5.5 Removing/re-installing the cover of the pram body

To remove the sun roof open the snap fastener at frame of pram body (fig. 40; no.
1). Open the snap fastener at both sides of sun roof joint (fig. 40; no. 2). Press both
locking buttons (fig. 41; no. 1). Remove the sun roof by lifting the frame upwards
(fig. 41; no. 2).
EN
51 51