Adjustment Of The Sun Roof; Removing/Re-Installing The Cover Of The Pram Body - Kiddy click'n move 3 Manual De Uso

wards, so that "green" will be indicated. test by
pulling upwards whether the pram body is lo-
cked in place and tightly connected to the the
chassis.
WARNING
the carrying belts shall be left out of the pram
body during use (fig. 37).
To remove the pram body from the chassis press both locking buttons down-
wards (fig. 38; no.1) so that these indicate "red" and pull the pram body upwards
(fig. 38; no.2)

5.4 Adjustment of the sun roof

The sun roof can be adjusted freely into the desired position by turning the front
bar of the sun roof (fig. 39).

5.5 Removing/re-installing the cover of the pram body

To remove the sun roof open the snap fastener at frame of pram body (fig. 40; no.
1). Open the snap fastener at both sides of sun roof joint (fig. 40; no. 2). Press both
locking buttons (fig. 41; no. 1). Remove the sun roof by lifting the frame upwards
(fig. 41; no. 2).
To remove the cover of pram body open the snap fastener (fig. 42) and zipper (fig.
43) around the whole frame.
Remove the mattress.
Now the cover can be removed completely.
To re-install the cover, follow the steps for removing the cover in reverse order.
EN
51 51