Electrical Diagrams; Installation With An External "1-Button" Module And A Monitor; Installation With An External "1-Button" Module And Two Monitors; Installation With An External "2-Button" Module And Two Monitors - SOMFY V SYSTEM PRO Manual De Instalación

Ocultar thumbs Ver también para V SYSTEM PRO:
Tabla de contenido
The electrical diagram must be adapted to the installation to be implemented. For more complex installations than those
presented below, please consult the diagrams book available as a pdf.
Note: The external module can control an electric lock or a motorised gate. To control both, a relay module is required, ref.
9020031.

7.1 Installation with an external "1-button" module and a monitor

1
See diagram
at the end of the document.

7.2 Installation with an external "1-button" module and two monitors

Bus line between the two monitors
2
See diagram
at the end of the document.
Bus line distributed via the electric panel
3
See diagram
at the end of the document.

7.3 Installation with an external "2-button" module and two monitors

4
See diagram
at the end of the document.

7.4 Push button for a remote buzzer

It is possible to connect an independent push button enabling the buzzer on the monitors to ring with a different tune
from that used for calls from an external module.
Copyright © 2016 Somfy SAS. All rights reserved.

7 ELECTRICAL DIAGRAMS

9020027
9020027
0
0
230V
230V
+BUS-
+BUS-
N L
230 VAC
50 Hz
EN
11
Tabla de contenido
loading

Este manual también es adecuado para:

5130407a

Tabla de contenido