Connecting The Power Cable; Other Connections; About The Standby State; How To Use The Remote Control - Yamaha MCR-B020 Manual De Instrucciones

Connecting the power cable

Rear panel

Other connections

USB device
External devices

About the standby state

This unit has the following two types of standby state. Select the mode in POWER SAVING settings menu (☞ P. 14).
Mode
*
ECO standby
(power saving mode)
Standby
* Default setting

How to use the remote control

To AC outlet
Rear panel
Setting menu
(POWER Clock display
SAVING)
ECO No clock display
NORMAL Show
Within 6 m (20')
Battery insulation sheet: Remove before using.
When you've completed all connections, connect the
supplied power cable to AC IN, and then connect the plug of
the cable to an AC outlet.
Connect your USB device to the USB port on the top panel.
For details on playable files, refer to "NOTES ON DISCS
AND USB DEVICES" (☞ P. 21).
The USB device is automatically charged when this unit is
connected to the AC outlet.
• Stop playback before disconnecting the USB device.
• Charging may not be possible depending on the USB device.
Using a commercially available 3.5 mm stereo mini-plug
cable, connect your external device to the AUX jack on the
rear panel of this unit.
Bluetooth Charging of USB
connection
Disable
Enable
CONNECTIONS
Alarm setting
devices
Enable Disable
Enable Enable
5
En