General Safety Precautions - Ryobi ETS-1525SC Manual De Operacion Del Propietario

GENERAL SAFETY PRECAUTIONS

WARNING!
When using electric tools basic safety precautions
should always be followed to reduce the risk of
reduce, electric shock and personal injury. Read all
these instructions before attempting to operate your
product. Save these instructions
reference.
Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite dust or fumes.
Children, visitors and pets should be kept a
safe distance from the work area.
Avoid wearing loose clothing, jewellery or
anything that could get caught in moving
parts. Long hair should be tied back. Use of
safety goggles is recommended (normal
glasses are not sufficient for eye protection).
Face or dust masks should be used if dust is
produced or working overhead. Ear protection
is advised during periods of extended
operation.
Do not overreach. Keep proper footing and
balance at all times; wear oil-resistant rubber
footwear. Keep floor clear of oil, scrap and
other debris.
Do not force the tool. Do not attempt to use
the tool for a purpose for which it was not
designed. The tool will give much better
service if you do not use excessive force.
Disconnect the plug when not in use, or when
changing accessories, making adjustments,
cleaning or working on tool. Always unplug
when leaving the tool unattended. All tools
should be kept out of the reach of children
when not in use. Do not expose the tool to
rain and moisture.
Only use accessories that are recommended
by the manufacturer of your model.
Accessories that may be suitable for one tool
may create a risk of injury when used on
another tool.
Guard against electric shocks – avoid body
contact with earthed surface (e.g. radiators,
pipes, dishwashers, refrigerators). Hold the
tool by insulated gripping surfaces when
performing an operation where the cutting
tool may contact hidden wiring.
Make sure the cord is located so that it will
not be stepped on, tripped over or
otherwise subjected to damage or stress.
Avoid accidental start-ups; make sure that
the power switch is in "OFF" position before
plugging in the power.
for future
Maintain tools properly. Always keep tools
clean and in good working order. Follow
instructions for lubricating and changing
accessories.
Check damaged parts. Check for alignment
of moving parts, binding of moving parts,
breakage of parts, improper mounting, or
any other condition that may affect the tools
operation. Any part that is damaged should
be properly repaired or replaced.
Never use solvents to clean plastic parts.
Solvents
otherwise damage the material. Only a soft
damp cloth should be used to clean plastic
parts.
Always use in a well ventilated area.
Remove sawdust frequently. Clean out
sawdust from the interior of the saw to
prevent a potential fire hazard.
Despite the machine being operated in
conformity with the intended conditions of
use and under observance of all relevant
safety regulations, due to the design
required by the nature of work to be carried
out with it, some residual risks remain
possible. These risks including contact with
the revolving blade in the cutting area,
kickback of the workpiece or parts thereof,
breaking of the saw blade with the broken
parts being ejected from the machine,
contact with live parts when checking
electrical
inspection, emission of harmful wooden
dusts when operated without a dust
collector.
9
could possibly dissolve
components opened
or
for