Call To Switchboard - Urmet elekta Manual De Usuario

Use the keys to select the block where the user to be called is present and
OK
then press the key.
The keypad can be used to make the search faster. After inserting the fi rst
letters of the block name, use the
OK
press the key.
C
The key makes it possible to cancel any mistakes make while keying in.
Press the arrow key or the
up the scrolling of the list of blocks.
Insert the numerical code of the user to be called, then press the
The home page of the secondary call module is shown here by the side.
Insert the numerical code of the user to be called, then press the
The option ''FOR SWITCHBOARD PRESS
depending on the system confi guration.
Conversations and busy conditions are managed in the same way as in calls by means of codes.
Refer to the respective section for more information.

6 CALL TO SWITCHBOARD

The home page of the call module is shown here by the side.
Press the once to contact the operator (if the system was confi gured with
this option).
20
keys to select it from the list and then
arrow key for more than 1s to speed
" may not be present,
key.
key.
DS1060-136