Call Button To Video Door Phone Association; Line Terminal; Installation Completion; Programming The Intercom Function - Urmet miro 1722/83 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

2.3.2

CALL BUTTON TO VIDEO DOOR PHONE ASSOCIATION

Video door phone associated with
the call button 1
2.3.3

LINE TERMINAL

The line termination must be activated on a video door phone connected at the end of a line without a new
section restarting from the LINE OUT terminals.
Terminal insert (default)
2.4

INSTALLATION COMPLETION

Connect.
Fix the video door phone to the bracket.
1
2
2.5

PROGRAMMING THE INTERCOM FUNCTION

The system offers the option of programming 2 buttons (1
With the kit Ref. 1722/83 you can call up to 2 video door phones in the same apartment.
With the kit Ref. 1722/84 you have two calling options:
up to 2 video door phones in the same apartment,
1 video door phone in the same apartment and all video door phones of the other apartment.
To programme the buttons:
Go to the indoor station to be programmed as caller (indoor station A).
Press and hold
confi rmation beeps to confi rm the new setting.
Press the button to be programmed as "caller" (
confi rmation tone.
Go to the indoor station to be called by that button (indoor station B) and press the door-key button. The
indoor stations A and B will emit a beep to confi rm the new setting.
To exit the programming mode, press and hold
In any case, after 10 minutes the device will automatically quit the programming mode, saving
the edited parameters.
With the kit Ref. 1722/84, the call to a video door phone in the second apartment will
necessarily sound all video door phones in the apartment.
14
Dip switch
position
ON
1
Call button 1
Dip switch
position
ON
1
To remove the video door phone from
the
bracket,
screwdriver into the seating as indicated
in the figure and push the video door
phone upwards.
for more than 5 seconds; the red LED will fl ash slowly and the system will emit 3
Video door phone associated with
the call button 2
2
3
4
Call button 2
Terminal not inserted
2
3
4
insert
the
and
or
) for at least 3 seconds until you hear the
for more than 5 seconds on the indoor station A.
tip
of
a
2
) to make intercom calls.
Dip switch
position
ON
1
2
3
4
Dip switch
position
ON
1
2
3
4
1
DS1722-099
Tabla de contenido
loading

Este manual también es adecuado para:

Miro 1722/84Miro 1722/88

Tabla de contenido