Opening The Door Using A Door Code - Urmet elekta Manual De Usuario

Conversations and busy conditions are managed in the same way as in calls by means of codes.
Refer to the respective section for more information.

7 OPENING THE DOOR USING A DOOR CODE

The home page of the call module is shown here by the side.
Press the button once.
The option ''FOR SWITCHBOARD PRESS
depending on the system confi guration.
Enter the door opener code and press
C
Press on the short-cut menu to cancel the digit to the left of the cursor if you
make a mistake. Press the
page.
A page containing an error message will appear for 5 seconds if an incorrect
code is entered.
If the code entered is correct, a screen will appear to request that the user
1
press key to open the pedestrian door or key
both doors were enabled, otherwise the following message will be immediately
presented).
DS1060-136
OK
or the
X
button (on the keypad) to go back to the home
" may not be present,
key to confi rm.
2
to open the garage gate (if
21