EGO POWER+ LB5754 Manual Del Operador página 15

ASSEMBLING THE BLOWER TUBE
WARNING:
injury, always remove the battery pack from the tool when assembling parts.
1. Align the groove in the tube
with the knob on the blower
housing. Push the tube onto the
blower housing until the latch
snaps into place (Fig. 2 & 3).
2. To remove the tube, press and
hold the tube-release button
to disengage the latch, then
pull the tube straight from the
blower (Fig. 4).
To prevent accidental starting that could cause serious personal
56V LITHIUM-ION CORDLESS BLOWER — LB5754
2
3
4
2
1