Installing The Soap Dispenser; Installing The Garbage Disposer (Optional) - Glacier bay QK004 Guía De Uso

Installation (continued)

INSTALLING THE SOAP DISPENSER

- Insert the pump top (1) into the dispenser assembly (2) . Add one
rubber gasket (3) onto the dispenser assembly (2) . Insert the
dispenser assembly (2) through the pre-drilled hole on the top
surface of the sink (A) .
- From the bottom of the sink (A), install the other rubber gasket
(3), the mounting nut (4) and the lock nut (5) onto the dispenser
assembly (2) . Hand tighten .
- Screw the soap reservoir (6) into the lock nut (5) to complete
the installation .
- To fill the reservoir (6), lift the pump top (1) straight up to
remove it from the dispenser assembly (2) . Carefully pour in
liquid soap . Reinstall the pump top (1) .
NOTE:
This unit is designed to use household liquid soap only. Using any other
soap or chemicals in this unit may damage the dispenser and void the
warranty.
INSTALLING THE GARBAGE DISPOSER
NOTE:
If you are installing a garbage disposer (not supplied), do not install a
strainer in the sink. Adaptor (H) is intended for use with metal waste
disposer mounting flanges.
- To install a garbage disposer, place the rubber ring (J) around
the underside lip of the adaptor (H) .
- Insert the adaptor (H) into the drain hole of the sink (A) .
- Install the garbage disposer to the adaptor (H) according to the
garbage disposer manufacturer's installation instructions .
1
2
3
A
H
A
J
13
Please contact 1-855-HD-GLACIER for further assistance .
A
3
4
5
6
HOMEDEPOT .COM/GLACIERBAY