Installing The Batteries - Glacier bay HD67540-1008D2 Guía De Instalación Y Cuidado

Installation (continued)
11

Installing the batteries

□
To open the timer
□
Install the two AA batteries (N) included by matching the positive (+) and Negative (-) ends on the
battery (N) to the (+) and (-) markings in the
always connect to the spring end of the battery slots in the
□
Reinstall the timer
NOTE: The base of the control valve will flash red when its time to change filters and batteries. When it double flashes, 6 months have
passed and its time to replace the filters. When it flashes a single fading flash, 1 year has passed and it is time to replace the filters and
the timer batteries, then press reset button for 5 seconds to reset timer.
NOTE: Use only AA Alkaline batteries. Identify the Anode (+) and the Cathode (-) to install the batteries properly.
To avoid battery damage: Do not recharge or disassemble batteries; Do not mix old batteries with new batteries; Do not use carbon
batteries; Do not expose batteries to extreme heat. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc)
batteries.
(O), push out the cover (4).
cover (4) by pushing into place.
4
O
timer (O). The negative ends of the battery (N) should
timer (O).
(+)
(-)
O
N
O
13
Please contact 1-855-HD-GLACIER for further assistance.
O
HOMEDEPOT.COM/GLACIERBAY
4