Installation (continued)
4
Installing the valve bodies
NOTE: The hot end valve is identi ed with a label.
□
From underneath the deck, insert the cold end
valve (J) with the rubber washer (K), metal
washer (L) and mounting nut (M) through
the hole on the right (cold) side.
□
From above, thread the ange (H) onto the
valve body (J).
□
Tighten the mounting nut (M) using a basin
wrench, so that the ange (H) sits ush against
the nished deck surface.
□
Repeat this procedure for the hot end valve (I)
on the left (hot) side.
I
H
J
K
L
M
5
Installing the handle
□
Place the handle (G) onto the cartridge stem (1)
and tighten with the screw (F). Insert the
index (E).
□
Place the other handle onto the left (hot) valve
and install the same way.
5
Please contact 1-855-HD-GLACIER for further assistance.
E
F
G
1
HOMEDEPOT.COM