Before First Use - Reer Neo Digital Manual De Uso

1
Only the supplied adapter (5 V DC / 500 mA) may be used.
NOTE: Only use rechargeable NiMH AAA batteries! Never use non-rechargeable batteries
in the baby monitor. Using unsuitable battery types poses an explosion hazard!
2
3
If the highly sensitive microphone on the baby unit detects a sound, the unit will
begin transmitting to the parent unit. The LED light on the parent unit flashes
green (rapidly) when the unit senses noise.
4
When your child is quiet and the baby unit does not receive any noise, the device
automatically switches to standby mode (ECO mode). When ECO mode is swit-
ched on, the baby unit emits a little radiation in standby mode. The baby unit starts
to send again only when noises are received.
TIP
You can attach the parent unit to your belt using the belt clip, or hang it on a wall
with the appropriate fastening material.
NOTE: The parent unit can optionally be operated also with three AAA NiMH cells (not
included).

Before first use

To switch on the devices, press and
hold the on / off button for 2 seconds.
The status LED on the baby and
parent unit lights up green. The two
devices automatically connect.
GB
17