Scope Of Delivery; Description Of Babyphone; Before First Use - Reer Neo 200 Manual De Uso

Scope of delivery

baby unit (transmitter) parent unit (receiver)
with mains adaptor with mains adaptor

Description of babyphone

PARENT UNIT
speaker
status LED
On/Off/Channel
selector switch
volume control
BABY UNIT
status LED
On/Off/Channel
selector switch
14
instruction manual
belt clip
battery compartment
mains adapter
connector
mains adapter
connector
1
Only the supplied adapter (6V DC/300 mA) may be used.
2
Select the same channel on both devices (A or B).
The status LED on the baby unit and the parent unit lights up green.
If the highly sensitive microphone on the baby unit detects a sound, the unit will
3
begin transmitting to the parent unit. When noise is received, the status LED on
the parent unit begins to flash orange.
When your child is quiet and the baby unit does not receive any noise, the device
4
automatically switches to standby mode (ECO mode). In this mode, the baby unit
does not emit any radiation. The baby unit starts to send again only when noises
are received.
TIP
You can attach the parent unit to your belt using the belt clip, or hang them on a wall
using a suitable fastening material.
NOTE: The parent unit can optionally be operated also with two AAA batteries (not
included in the deliverables).

Before first use

GB
15