Overheating Protection & Reset; Design And Function; Overview - CASO DESIGN HW 400 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
12.7 Overheating protection & reset
The appliance is equipped with an overheating protection
facility. If the temperature of the appliance exceeds the
critical limit the appliance shuts off further power supply for
Please use enclosed reset-key for the reset-button.

13 Design and Function

In this chapter, you'll find important information on the design and function of the device.

13.1 Overview

► Warning symbol: hot steam.
► Caution hot steam can escape at device. Risk of burns.
safety reasons.
Remove the water tank. You can
see the reset button.
By pressing the reset button (1)
the appliance can be reactivated.
Unplug the device before reset.
When the device is only producing
cold water please press reset
button.
Warning
1 temperatur control dial
2 lid of watertank
3 watertank
4 body
5 foot
6 drip tray
7 cover of drip tray
8 spout
9 on/off switch
29
Tabla de contenido
loading

Tabla de contenido