Maintenance; Cleaning - Samsung NX58M6650W Serie Manual Del Usuario

Ocultar thumbs Ver también para NX58M6650W Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Maintenance

Cleaning

Control panel
First, lock the control panel and the door to prevent accidental operations and/or
product tipping.
Press and hold the START/SET pad for 3 seconds to lock both the control panel
1.
and the door.
2.
Clean the control panel using a soft cloth dampened with plain water, warm
soapy water, or glass cleaner. Do not spray cleansers directly onto the control
panel.
3.
When done, press and hold the START/SET pad again for 3 seconds.
WARNING
Make sure the control panel turns off and all surfaces of the range are cool
before cleaning. Otherwise, you can get burned.
If the range has been moved away from the wall, make sure the anti-tip
device is reinstalled properly when the range has been put into place again.
Otherwise, the range may tip over, causing physical injuries.
Do not use steel-wool or abrasive cleansers of any kind. These can scratch or
damage the surface.
Stainless steel surface
1.
Remove any spills, spots, and grease stains using a soft, wet cloth.
2.
Apply an approved stainless steel cleanser to a cloth or paper towel.
3.
Clean one small area at a time, rubbing with the grain of the stainless steel if
applicable.
When done, dry the surface using a soft, dry cloth.
4.
5.
Repeat steps 2 through 4 as many times as necessary.
CAUTION
Do not use a steel-wool pad or abrasive cleanser on stainless steel surfaces.
They will scratch the surface.
Do not spray any type of cleanser into the manifold holes. The ignition system
is located in those holes and must be kept free of moisture.
NX5000M_NX58M6650WS_AA_DG68-00993A-00_EN+MES+CFR.indb 37
Racks
To keep the racks clean, remove them from the cavity, and soak them in lukewarm,
soapy water. Then, scour impurities off of the racks using a plastic scouring pad.
If the racks do not slide in and out smoothly after you have cleaned them, rub the
side rail guides with wax paper or a cloth containing a few drops of cooking oil.
This will help the racks glide more easily on their tracks.
NOTES
Do not put the racks in a dishwasher.
If a rack does not slide in and out smoothly, apply a few drops of cooking oil
to the oven rack guides.
If a rack becomes too difficult to slide in or out, lubricate the rack with
graphite lubricant.
To purchase the graphite lubricant, contact us at 1-800-SAMSUNG (726-7864).
For online shopping, visit http://www.samsungparts.com/Default.aspx and
search for part DG81-01629A.
CAUTION
Do not leave the racks in the oven during the self-cleaning cycle. The extreme
heat generated in this cycle can permanently peel off the rack coating and
make it difficult to slide the racks on the guide rails.
Do not spray cooking oil or lubricant directly onto the racks.
Door
Do not remove the inner gasket of the oven door for cleaning.
Inner side
Inner surface: Clean the inner side of the door manually using a soapy plastic
scouring pad, and then wipe with a dry cloth. Take care not to get the gasket
wet or allow moisture into the door.
Inner glass: The inner glass is cleaned automatically during the self-cleaning
cycle.
English 37
6/29/2017 1:09:30 PM
Tabla de contenido
loading

Este manual también es adecuado para:

Nx58m6630s serie

Tabla de contenido