Operating The X-Series Premium Controller; Carrying Out Menu Settings - Pfannenberg DTS Serie Manual De Instrucciones

GB
4.2

Operating the X-Series Premium Controller

1 2
6
Figure 16 - Control panel (MC)
The control panel has four menu settings that are displayed on the LCD (1).
LCD display Menu setting
SetP: Switch cabinet temperature setpoint
Lit¯: Maximum switch cabinet temperature value (high limit value)
Lit_: Minimum switch cabinet temperature value (low limit value)
Unit: Unit of the switch cabinet temperature
4.3

Carrying out menu settings

Requirement
-
Cooling unit has started operation.
-
LED light (6) of the control panel illuminates green.
Procedure
 Scroll through the menus (SetP, Lit¯, Lit_, Unit) from the temperature display (1) with the SCROLL UP (3) and
SCROLL DOWN (4) buttons.
 Select a menu with the SET button (5).
 Enter the password. After pressing the SET button (5) press the SCROLL UP (3) and SCROLL DOWN (4)
buttons within two seconds; see Password button combination figure.
 Always adjust the desired value with the SCROLL UP(3) and SCROLL DOWN(4) buttons.
 Confirm the value with the SET button (5).
 When the BACK button (2) is pressed, the value is not saved.
 Select a different menu by scrolling with the SCROLL UP(3) and SCROLL DOWN(4) buttons.
 If there is no input for 30 seconds, a TIMEOUT is initiated and the LCD switches to temperature display.

Menu is adjusted in the cooling unit.
Operating Manual DTS and DTI 6X2E Premium Controller X-Series (XC) 086100099d © Pfannenberg GmbH
3 4 5
Password
5 3
< 2s
Figure 17 - Password button combination (MC)
4
< 2s
Input
0 – 90 °C
- 55 – 95 °C
- 55 – 95 °C
°C / °F
Page 26 / 42