Remote Slave Flash Mode Settings; Setting The Slave Channel; Set Slave Mode - Metz mecablitz 52 AF-1 Pentax digital Manual De Instrucciones

9.3.1 Remote slave flash mode settings

• Switch on the flash unit with the
button. The start screen appears.
Thereafter, the flash unit always switches
on with the mode of operation that was
used last (e.g. M flash mode).
P TTL
• Press the displayed mode of operation on
the touch display as many times as it takes
-7,9 m
0,7
for the display for selecting the mode of
m
Z
F4.0
35
OOM
operation to appear.
m
EV
INFO
MASTER
• Press the
SLAVE
touch display and select "SLAVE".
SERVO
• Press the
touch display.
Remote slave mode is set.
REMOTE CH
TTL
SLAVE 1
In addition, the selected flash mode (e.g.
Z
35 mm
OOM
TTL) and the remote channel (e.g. CH 1) are
displayed.
EV
INFO
sensor buttons on the
SLAVE
sensor button on the

9.3.2 Setting the slave channel

REMOTE
CH
TTL
• Press the sensor button on the touch dis-
SLAVE 1
play for the channel group (e.g.
Z
The window for selecting the channel and
35 mm
OOM
group appears.
EV
INFO
• Press the sensor buttons on the touch
display for the channel "CH".
• Press the
touch display and select the desired
channel.
• Press the selected channel on the touch
display.
The setting will take effect immediately.

9.3.3 Set slave mode

• Press the sensor button on the touch dis-
REMOTE CH
TTL
SLAVE
1
play for the partial light output/exposure
correction (e.g.
Z
35 mm
OOM
the selection appears.
EV
INFO
• Press the sensor buttons on the touch dis-
play for the channel "MODE".
• Press the sensor button on the touch dis-
play for the desired mode of operation
M
M
or .
TTL
The setting is applied automatically.
TTL I CH1
).
sensor buttons on the
TTL I CH1
). The window for
TTL
159
k