Cordless Flash Mode; Remote Master Mode Settings - Metz mecablitz 52 AF-1 Pentax digital Manual De Instrucciones

9 Cordless flash mode

The flash unit supports the wireless Pentax P
TTL remote system.
The remote system consists of a master flash
unit on the camera and one or more slave
flash units. The slave flash unit(s) are con-
trolled via wireless technology by the reflec-
tor of the master flash unit.
There are four independent remote channels
to use so that multiple remote systems in the
same room do not interfere with one another.
Master and Slave flash units belonging to the
same remote system must be set to the same
remote channel.
The slave flash units must be able to receive
the light from the master flash unit with the
integrated sensor for remote mode.
In remote flash mode, the maximum flash
k
range is not indicated on the flash unit's dis-
play panel.

9.1 Remote master mode settings

In remote master mode the master flash unit
on the camera controls all slave flash units
and also contributes to exposure of the shot
itself.
156
9.1.1 Remote master mode settings
• Switch on the flash unit with the
button. The start screen appears.
• Press the sensor button of the displayed
P TTL
mode of operation on the touch display as
-7,9 m
0,7
many times as it takes for the display for
m
Z
F4.0 selecting the mode of operation to appear.
35
OOM
m
EV
INFO
SPOTBEAM
• Press the
CONTROL touch display and select
• Press the
REMOTE
MASTER
touch display. Remote master mode is set.
Remote master mode is shown in the picture.
Z 35
OOM mm
EV
INFO
sensor buttons on the
MASTER
.
MASTER
sensor button on the