Remote Slave Flash Mode Settings; Setting The Slave Channel - Metz 52 AF-1 Nikon digital Manual De Instrucciones

10.2.1 Remote slave flash mode settings

• Switch on the flash unit with the
TTL BL
• Press the displayed mode of operation on
-7,9 m
0,7
m
Z
F4.0
35
OOM
m
EV
INFO
MASTER
SLAVE
SERVO
• Press the
MASTER
k
SLAVE
• Press the
SERVO
REMOTE CH
A
SLAVE 1
In addition, the selected slave group (e.g. A)
Z
35 mm and the remote channel (e.g. CH 1) are
OOM
displayed.
INFO
166
button. The start screen appears.
Thereafter, the flash unit always switches
on with the mode of operation that was
used last (e.g. M flash mode).
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
sensor buttons on the
touch display and select "SLAVE".
SLAVE
sensor button on the
touch display.
Remote slave mode is set.

10.2.2 Setting the slave channel

• Press the sensor button on the touch display
A I CH1
for the channel group (e.g.
The window for selecting the channel and
group appears.
• Press the sensor buttons on the touch
display for the channel "CH".
• Press the sensor buttons on the
touch display and select the desired
channel.
• Press the selected channel on the touch
display.
The setting will take effect immediately.
).