1 Control Panel Overview - LG LSES302ST Manual Del Usuario

CONTROL PANEL OVERVIEW
Cooktop Element
Dual Elemet
NOTE
Cooktop Element Controls are set up in the same
order as the corresponding elements.
Hot Surface Indicator
Hot surface indicator light will glow as long as any surface cooking area is too hot to touch.
It will remain on after the element is turned off and the surface has cooled to approximately 150 ˚F.
PF(Power Failure) / Flashing Time
Depending on the model of your range, the display will either show "PF" or a flashing clock. This means that the product
has just been plugged in, or that it has experienced a power interruption. To clear the "PF" message, touch the "Clear/Off"
button on the oven controls. If your oven displays a flashing clock, then touch the "Clock" button and reset the time, or
touch any button to stop flashing.
Oven Controls
Number Buttons
Start/Lockout
Button
Warm zone
<Cooktop Element Control>
Features Cooktop Element
Warm
200˚F
250˚F 450˚F
300˚F 400˚F
350˚F
Clear Off Button
Single Elements
Triple Element
Hot surface indicator light
11
OVERVIEW