Attaching/Removing The Infant Carrier - Kiddy evoglide 1 Manual De Uso

When the locking buttons indicate "red", pull
these upwards, so that "green" will be indicated.
Test by pulling upwards whether the infant car-
rier adapters are locked in place and tightly con-
nected to the chassis.
To remove the infant carrier adapters from the chassis press both locking buttons
downwards so that these indicate "red" (fig. 45; no. 1) and pull the adapters up-
wards (fig. 45; no. 2).

6.2 Attaching/removing the infant carrier

ADAPTER COMPATIBLE
KIDDY MaxiCosi
Evoluna i-Size Pepple plus
Evolunafix Cabrio fix
Evolution Pro 2
WARNING
Make sure that your child is secured in the infant
carrier like described in it's operating manual.
Attach the infant carrier against the driving direction on the adaptors. Ensure that
the Infant carrier will be locked noticeable at both adaptors. Push at both sides
the shell downwards (fig.46; no.1) Try to lift up the handle (fig.46; no.2) to check if
both sides are locked proper at the adaptors.
Hold both buttons at the handle of the infant carrier pushed (fig. 47; no. 1).
Turn the handle in frontal direction until the handle buttons lock in place
(fig. 47, no. 2).
Cybex Be safe
Aton Q Izi go
Cloud Q
EN
Recaro
Privia
53 53